Description
Fit Factor Range
1 to greater than 10,000, 1 to 200 for N95 masks
Typical Fit Factor Accuracy
±10% of reading
Respirator Facepieces that can be Fit Tested
Full-face elastomeric, Half-face elastomeric, NIOSH series-100 filtering-facepiece, NIOSH series-99 filtering-facepiece, NIOSH series-95 filtering-facepiece, Series FFP1, FFP2, FFP3 respirators
Fit Factor Measurement
Direct measurement of fit factor (Cout/Cin)*
Dimensions
4.83 in. x 10.5 in. x 9.46 in. (12 cm x 27 cm x 24 cm)
Weight
Unit Only 7.0 lb. (3.2 kg), With Standard Accessories and Case 15.35 lb. (6.9 kg)
Power
Autosensing 100 to 250 VAC, 50 to 60 Hz
Flow Rate
Sample 350 cm3/min
Total 1000 cm3/min (nominal)
Temperature Range
Operation 32 to 100°F (0 to 38°C), Storage -40 to 122°F (-40 to 50°C)
Working fluid
99.5% reagent grade isopropanol.
Run time per charge: 6 hr of fit testing operational 70°F (21°C)
Carrying Case
Dimensions (HWD) 10.0 in. x 20.5 in. x 15.5 in.
(25.4 cm x 52.1 cm x 39.4 cm)
Pass/Fail Setting
User-selectable: 0 to 10,000
Factory Recalibration Interval
One year
Warranty
Two years on workmanship and materials.
Communications
WiFi, USB-C, USB-A
Minimum PC Hardware Requirements for FitPro Ultra Fit Test Software
Windows® 7 (32 and 64 bit), Windows 8 (32 and 64 bit), or Windows 10 (32 and 64 bit) operating system
Microsoft.Net version 4 (installation software will install Microsoft.Net if necessary) Note — An internet connection is required to install Microsoft.Net
≥ 1 GHz process
≥ 1280 x 800 screen resolution monitor
500 MB free space on a hard drive
1 free USB port
Minimum Tablet requirements
Windows® 10 operating system
USB port (for initial set up)
Software
FitPro Ultra Software featuring advanced user interface, animated graphics, and interactive troubleshooting guide.
Optional Accessories
Mask Sampling Adapters for select respirator models., Microsoft® Surface Pro Tablet (4 GB RAM, 128 GB of storage). WiFi USB dongle.
